home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Workbench Add-On
/
Workbench Add-On - Volume 1.iso
/
BBS-Archive
/
Dev
/
gcc263-src.lha
/
gcc-2.6.3
/
gcc.info-17
(
.txt
)
< prev
next >
Wrap
GNU Info File
|
1994-11-23
|
47KB
|
842 lines
This is Info file gcc.info, produced by Makeinfo-1.55 from the input
file gcc.texi.
This file documents the use and the internals of the GNU compiler.
Published by the Free Software Foundation 675 Massachusetts Avenue
Cambridge, MA 02139 USA
Copyright (C) 1988, 1989, 1992, 1993, 1994 Free Software Foundation,
Permission is granted to make and distribute verbatim copies of this
manual provided the copyright notice and this permission notice are
preserved on all copies.
Permission is granted to copy and distribute modified versions of
this manual under the conditions for verbatim copying, provided also
that the sections entitled "GNU General Public License," "Funding for
Free Software," and "Protect Your Freedom--Fight `Look And Feel'" are
included exactly as in the original, and provided that the entire
resulting derived work is distributed under the terms of a permission
notice identical to this one.
Permission is granted to copy and distribute translations of this
manual into another language, under the above conditions for modified
versions, except that the sections entitled "GNU General Public
License," "Funding for Free Software," and "Protect Your Freedom--Fight
`Look And Feel'", and this permission notice, may be included in
translations approved by the Free Software Foundation instead of in the
original English.
File: gcc.info, Node: Expander Definitions, Next: Insn Splitting, Prev: Peephole Definitions, Up: Machine Desc
Defining RTL Sequences for Code Generation
==========================================
On some target machines, some standard pattern names for RTL
generation cannot be handled with single insn, but a sequence of RTL
insns can represent them. For these target machines, you can write a
`define_expand' to specify how to generate the sequence of RTL.
A `define_expand' is an RTL expression that looks almost like a
`define_insn'; but, unlike the latter, a `define_expand' is used only
for RTL generation and it can produce more than one RTL insn.
A `define_expand' RTX has four operands:
* The name. Each `define_expand' must have a name, since the only
use for it is to refer to it by name.
* The RTL template. This is just like the RTL template for a
`define_peephole' in that it is a vector of RTL expressions each
being one insn.
* The condition, a string containing a C expression. This
expression is used to express how the availability of this pattern
depends on subclasses of target machine, selected by command-line
options when GNU CC is run. This is just like the condition of a
`define_insn' that has a standard name.
* The preparation statements, a string containing zero or more C
statements which are to be executed before RTL code is generated
from the RTL template.
Usually these statements prepare temporary registers for use as
internal operands in the RTL template, but they can also generate
RTL insns directly by calling routines such as `emit_insn', etc.
Any such insns precede the ones that come from the RTL template.
Every RTL insn emitted by a `define_expand' must match some
`define_insn' in the machine description. Otherwise, the compiler will
crash when trying to generate code for the insn or trying to optimize
The RTL template, in addition to controlling generation of RTL insns,
also describes the operands that need to be specified when this pattern
is used. In particular, it gives a predicate for each operand.
A true operand, which needs to be specified in order to generate RTL
from the pattern, should be described with a `match_operand' in its
first occurrence in the RTL template. This enters information on the
operand's predicate into the tables that record such things. GNU CC
uses the information to preload the operand into a register if that is
required for valid RTL code. If the operand is referred to more than
once, subsequent references should use `match_dup'.
The RTL template may also refer to internal "operands" which are
temporary registers or labels used only within the sequence made by the
`define_expand'. Internal operands are substituted into the RTL
template with `match_dup', never with `match_operand'. The values of
the internal operands are not passed in as arguments by the compiler
when it requests use of this pattern. Instead, they are computed
within the pattern, in the preparation statements. These statements
compute the values and store them into the appropriate elements of
`operands' so that `match_dup' can find them.
There are two special macros defined for use in the preparation
statements: `DONE' and `FAIL'. Use them with a following semicolon, as
a statement.
`DONE'
Use the `DONE' macro to end RTL generation for the pattern. The
only RTL insns resulting from the pattern on this occasion will be
those already emitted by explicit calls to `emit_insn' within the
preparation statements; the RTL template will not be generated.
`FAIL'
Make the pattern fail on this occasion. When a pattern fails, it
means that the pattern was not truly available. The calling
routines in the compiler will try other strategies for code
generation using other patterns.
Failure is currently supported only for binary (addition,
multiplication, shifting, etc.) and bitfield (`extv', `extzv', and
`insv') operations.
Here is an example, the definition of left-shift for the SPUR chip:
(define_expand "ashlsi3"
[(set (match_operand:SI 0 "register_operand" "")
(ashift:SI
(match_operand:SI 1 "register_operand" "")
(match_operand:SI 2 "nonmemory_operand" "")))]
""
"
{
if (GET_CODE (operands[2]) != CONST_INT
|| (unsigned) INTVAL (operands[2]) > 3)
FAIL;
}")
This example uses `define_expand' so that it can generate an RTL insn
for shifting when the shift-count is in the supported range of 0 to 3
but fail in other cases where machine insns aren't available. When it
fails, the compiler tries another strategy using different patterns
(such as, a library call).
If the compiler were able to handle nontrivial condition-strings in
patterns with names, then it would be possible to use a `define_insn'
in that case. Here is another case (zero-extension on the 68000) which
makes more use of the power of `define_expand':
(define_expand "zero_extendhisi2"
[(set (match_operand:SI 0 "general_operand" "")
(const_int 0))
(set (strict_low_part
(subreg:HI
(match_dup 0)
0))
(match_operand:HI 1 "general_operand" ""))]
""
"operands[1] = make_safe_from (operands[1], operands[0]);")
Here two RTL insns are generated, one to clear the entire output operand
and the other to copy the input operand into its low half. This
sequence is incorrect if the input operand refers to [the old value of]
the output operand, so the preparation statement makes sure this isn't
so. The function `make_safe_from' copies the `operands[1]' into a
temporary register if it refers to `operands[0]'. It does this by
emitting another RTL insn.
Finally, a third example shows the use of an internal operand.
Zero-extension on the SPUR chip is done by `and'-ing the result against
a halfword mask. But this mask cannot be represented by a `const_int'
because the constant value is too large to be legitimate on this
machine. So it must be copied into a register with `force_reg' and
then the register used in the `and'.
(define_expand "zero_extendhisi2"
[(set (match_operand:SI 0 "register_operand" "")
(and:SI (subreg:SI
(match_operand:HI 1 "register_operand" "")
0)
(match_dup 2)))]
""
"operands[2]
= force_reg (SImode, gen_rtx (CONST_INT,
VOIDmode, 65535)); ")
*Note:* If the `define_expand' is used to serve a standard binary or
unary arithmetic operation or a bitfield operation, then the last insn
it generates must not be a `code_label', `barrier' or `note'. It must
be an `insn', `jump_insn' or `call_insn'. If you don't need a real insn
at the end, emit an insn to copy the result of the operation into
itself. Such an insn will generate no code, but it can avoid problems
in the compiler.
File: gcc.info, Node: Insn Splitting, Next: Insn Attributes, Prev: Expander Definitions, Up: Machine Desc
Defining How to Split Instructions
==================================
There are two cases where you should specify how to split a pattern
into multiple insns. On machines that have instructions requiring delay
slots (*note Delay Slots::.) or that have instructions whose output is
not available for multiple cycles (*note Function Units::.), the
compiler phases that optimize these cases need to be able to move insns
into one-instruction delay slots. However, some insns may generate
more than one machine instruction. These insns cannot be placed into a
delay slot.
Often you can rewrite the single insn as a list of individual insns,
each corresponding to one machine instruction. The disadvantage of
doing so is that it will cause the compilation to be slower and require
more space. If the resulting insns are too complex, it may also
suppress some optimizations. The compiler splits the insn if there is a
reason to believe that it might improve instruction or delay slot
scheduling.
The insn combiner phase also splits putative insns. If three insns
are merged into one insn with a complex expression that cannot be
matched by some `define_insn' pattern, the combiner phase attempts to
split the complex pattern into two insns that are recognized. Usually
it can break the complex pattern into two patterns by splitting out some
subexpression. However, in some other cases, such as performing an
addition of a large constant in two insns on a RISC machine, the way to
split the addition into two insns is machine-dependent.
The `define_split' definition tells the compiler how to split a
complex insn into several simpler insns. It looks like this:
(define_split
[INSN-PATTERN]
"CONDITION"
[NEW-INSN-PATTERN-1
NEW-INSN-PATTERN-2
...]
"PREPARATION STATEMENTS")
INSN-PATTERN is a pattern that needs to be split and CONDITION is
the final condition to be tested, as in a `define_insn'. When an insn
matching INSN-PATTERN and satisfying CONDITION is found, it is replaced
in the insn list with the insns given by NEW-INSN-PATTERN-1,
NEW-INSN-PATTERN-2, etc.
The PREPARATION STATEMENTS are similar to those statements that are
specified for `define_expand' (*note Expander Definitions::.) and are
executed before the new RTL is generated to prepare for the generated
code or emit some insns whose pattern is not fixed. Unlike those in
`define_expand', however, these statements must not generate any new
pseudo-registers. Once reload has completed, they also must not
allocate any space in the stack frame.
Patterns are matched against INSN-PATTERN in two different
circumstances. If an insn needs to be split for delay slot scheduling
or insn scheduling, the insn is already known to be valid, which means
that it must have been matched by some `define_insn' and, if
`reload_completed' is non-zero, is known to satisfy the constraints of
that `define_insn'. In that case, the new insn patterns must also be
insns that are matched by some `define_insn' and, if `reload_completed'
is non-zero, must also satisfy the constraints of those definitions.
As an example of this usage of `define_split', consider the following
example from `a29k.md', which splits a `sign_extend' from `HImode' to
`SImode' into a pair of shift insns:
(define_split
[(set (match_operand:SI 0 "gen_reg_operand" "")
(sign_extend:SI (match_operand:HI 1 "gen_reg_operand" "")))]
""
[(set (match_dup 0)
(ashift:SI (match_dup 1)
(const_int 16)))
(set (match_dup 0)
(ashiftrt:SI (match_dup 0)
(const_int 16)))]
"
{ operands[1] = gen_lowpart (SImode, operands[1]); }")
When the combiner phase tries to split an insn pattern, it is always
the case that the pattern is *not* matched by any `define_insn'. The
combiner pass first tries to split a single `set' expression and then
the same `set' expression inside a `parallel', but followed by a
`clobber' of a pseudo-reg to use as a scratch register. In these
cases, the combiner expects exactly two new insn patterns to be
generated. It will verify that these patterns match some `define_insn'
definitions, so you need not do this test in the `define_split' (of
course, there is no point in writing a `define_split' that will never
produce insns that match).
Here is an example of this use of `define_split', taken from
`rs6000.md':
(define_split
[(set (match_operand:SI 0 "gen_reg_operand" "")
(plus:SI (match_operand:SI 1 "gen_reg_operand" "")
(match_operand:SI 2 "non_add_cint_operand" "")))]
""
[(set (match_dup 0) (plus:SI (match_dup 1) (match_dup 3)))
(set (match_dup 0) (plus:SI (match_dup 0) (match_dup 4)))]
"
{
int low = INTVAL (operands[2]) & 0xffff;
int high = (unsigned) INTVAL (operands[2]) >> 16;
if (low & 0x8000)
high++, low |= 0xffff0000;
operands[3] = gen_rtx (CONST_INT, VOIDmode, high << 16);
operands[4] = gen_rtx (CONST_INT, VOIDmode, low);
}")
Here the predicate `non_add_cint_operand' matches any `const_int'
that is *not* a valid operand of a single add insn. The add with the
smaller displacement is written so that it can be substituted into the
address of a subsequent operation.
An example that uses a scratch register, from the same file,
generates an equality comparison of a register and a large constant:
(define_split
[(set (match_operand:CC 0 "cc_reg_operand" "")
(compare:CC (match_operand:SI 1 "gen_reg_operand" "")
(match_operand:SI 2 "non_short_cint_operand" "")))
(clobber (match_operand:SI 3 "gen_reg_operand" ""))]
"find_single_use (operands[0], insn, 0)
&& (GET_CODE (*find_single_use (operands[0], insn, 0)) == EQ
|| GET_CODE (*find_single_use (operands[0], insn, 0)) == NE)"
[(set (match_dup 3) (xor:SI (match_dup 1) (match_dup 4)))
(set (match_dup 0) (compare:CC (match_dup 3) (match_dup 5)))]
"
{
/* Get the constant we are comparing against, C, and see what it
looks like sign-extended to 16 bits. Then see what constant
could be XOR'ed with C to get the sign-extended value. */
int c = INTVAL (operands[2]);
int sextc = (c << 16) >> 16;
int xorv = c ^ sextc;
operands[4] = gen_rtx (CONST_INT, VOIDmode, xorv);
operands[5] = gen_rtx (CONST_INT, VOIDmode, sextc);
}")
To avoid confusion, don't write a single `define_split' that accepts
some insns that match some `define_insn' as well as some insns that
don't. Instead, write two separate `define_split' definitions, one for
the insns that are valid and one for the insns that are not valid.
File: gcc.info, Node: Insn Attributes, Prev: Insn Splitting, Up: Machine Desc
Instruction Attributes
======================
In addition to describing the instruction supported by the target
machine, the `md' file also defines a group of "attributes" and a set of
values for each. Every generated insn is assigned a value for each
attribute. One possible attribute would be the effect that the insn
has on the machine's condition code. This attribute can then be used
by `NOTICE_UPDATE_CC' to track the condition codes.
* Menu:
* Defining Attributes:: Specifying attributes and their values.
* Expressions:: Valid expressions for attribute values.
* Tagging Insns:: Assigning attribute values to insns.
* Attr Example:: An example of assigning attributes.
* Insn Lengths:: Computing the length of insns.
* Constant Attributes:: Defining attributes that are constant.
* Delay Slots:: Defining delay slots required for a machine.
* Function Units:: Specifying information for insn scheduling.
File: gcc.info, Node: Defining Attributes, Next: Expressions, Up: Insn Attributes
Defining Attributes and their Values
------------------------------------
The `define_attr' expression is used to define each attribute
required by the target machine. It looks like:
(define_attr NAME LIST-OF-VALUES DEFAULT)
NAME is a string specifying the name of the attribute being defined.
LIST-OF-VALUES is either a string that specifies a comma-separated
list of values that can be assigned to the attribute, or a null string
to indicate that the attribute takes numeric values.
DEFAULT is an attribute expression that gives the value of this
attribute for insns that match patterns whose definition does not
include an explicit value for this attribute. *Note Attr Example::,
for more information on the handling of defaults. *Note Constant
Attributes::, for information on attributes that do not depend on any
particular insn.
For each defined attribute, a number of definitions are written to
the `insn-attr.h' file. For cases where an explicit set of values is
specified for an attribute, the following are defined:
* A `#define' is written for the symbol `HAVE_ATTR_NAME'.
* An enumeral class is defined for `attr_NAME' with elements of the
form `UPPER-NAME_UPPER-VALUE' where the attribute name and value
are first converted to upper case.
* A function `get_attr_NAME' is defined that is passed an insn and
returns the attribute value for that insn.
For example, if the following is present in the `md' file:
(define_attr "type" "branch,fp,load,store,arith" ...)
the following lines will be written to the file `insn-attr.h'.
#define HAVE_ATTR_type
enum attr_type {TYPE_BRANCH, TYPE_FP, TYPE_LOAD,
TYPE_STORE, TYPE_ARITH};
extern enum attr_type get_attr_type ();
If the attribute takes numeric values, no `enum' type will be
defined and the function to obtain the attribute's value will return
`int'.
File: gcc.info, Node: Expressions, Next: Tagging Insns, Prev: Defining Attributes, Up: Insn Attributes
Attribute Expressions
---------------------
RTL expressions used to define attributes use the codes described
above plus a few specific to attribute definitions, to be discussed
below. Attribute value expressions must have one of the following
forms:
`(const_int I)'
The integer I specifies the value of a numeric attribute. I must
be non-negative.
The value of a numeric attribute can be specified either with a
`const_int' or as an integer represented as a string in
`const_string', `eq_attr' (see below), and `set_attr' (*note
Tagging Insns::.) expressions.
`(const_string VALUE)'
The string VALUE specifies a constant attribute value. If VALUE
is specified as `"*"', it means that the default value of the
attribute is to be used for the insn containing this expression.
`"*"' obviously cannot be used in the DEFAULT expression of a
`define_attr'.
If the attribute whose value is being specified is numeric, VALUE
must be a string containing a non-negative integer (normally
`const_int' would be used in this case). Otherwise, it must
contain one of the valid values for the attribute.
`(if_then_else TEST TRUE-VALUE FALSE-VALUE)'
TEST specifies an attribute test, whose format is defined below.
The value of this expression is TRUE-VALUE if TEST is true,
otherwise it is FALSE-VALUE.
`(cond [TEST1 VALUE1 ...] DEFAULT)'
The first operand of this expression is a vector containing an even
number of expressions and consisting of pairs of TEST and VALUE
expressions. The value of the `cond' expression is that of the
VALUE corresponding to the first true TEST expression. If none of
the TEST expressions are true, the value of the `cond' expression
is that of the DEFAULT expression.
TEST expressions can have one of the following forms:
`(const_int I)'
This test is true if I is non-zero and false otherwise.
`(not TEST)'
`(ior TEST1 TEST2)'
`(and TEST1 TEST2)'
These tests are true if the indicated logical function is true.
`(match_operand:M N PRED CONSTRAINTS)'
This test is true if operand N of the insn whose attribute value
is being determined has mode M (this part of the test is ignored
if M is `VOIDmode') and the function specified by the string PRED
returns a non-zero value when passed operand N and mode M (this
part of the test is ignored if PRED is the null string).
The CONSTRAINTS operand is ignored and should be the null string.
`(le ARITH1 ARITH2)'
`(leu ARITH1 ARITH2)'
`(lt ARITH1 ARITH2)'
`(ltu ARITH1 ARITH2)'
`(gt ARITH1 ARITH2)'
`(gtu ARITH1 ARITH2)'
`(ge ARITH1 ARITH2)'
`(geu ARITH1 ARITH2)'
`(ne ARITH1 ARITH2)'
`(eq ARITH1 ARITH2)'
These tests are true if the indicated comparison of the two
arithmetic expressions is true. Arithmetic expressions are formed
with `plus', `minus', `mult', `div', `mod', `abs', `neg', `and',
`ior', `xor', `not', `ashift', `lshiftrt', and `ashiftrt'
expressions.
`const_int' and `symbol_ref' are always valid terms (*note Insn
Lengths::.,for additional forms). `symbol_ref' is a string
denoting a C expression that yields an `int' when evaluated by the
`get_attr_...' routine. It should normally be a global variable.
`(eq_attr NAME VALUE)'
NAME is a string specifying the name of an attribute.
VALUE is a string that is either a valid value for attribute NAME,
a comma-separated list of values, or `!' followed by a value or
list. If VALUE does not begin with a `!', this test is true if
the value of the NAME attribute of the current insn is in the list
specified by VALUE. If VALUE begins with a `!', this test is true
if the attribute's value is *not* in the specified list.
For example,
(eq_attr "type" "load,store")
is equivalent to
(ior (eq_attr "type" "load") (eq_attr "type" "store"))
If NAME specifies an attribute of `alternative', it refers to the
value of the compiler variable `which_alternative' (*note Output
Statement::.) and the values must be small integers. For example,
(eq_attr "alternative" "2,3")
is equivalent to
(ior (eq (symbol_ref "which_alternative") (const_int 2))
(eq (symbol_ref "which_alternative") (const_int 3)))
Note that, for most attributes, an `eq_attr' test is simplified in
cases where the value of the attribute being tested is known for
all insns matching a particular pattern. This is by far the most
common case.
`(attr_flag NAME)'
The value of an `attr_flag' expression is true if the flag
specified by NAME is true for the `insn' currently being scheduled.
NAME is a string specifying one of a fixed set of flags to test.
Test the flags `forward' and `backward' to determine the direction
of a conditional branch. Test the flags `very_likely', `likely',
`very_unlikely', and `unlikely' to determine if a conditional
branch is expected to be taken.
If the `very_likely' flag is true, then the `likely' flag is also
true. Likewise for the `very_unlikely' and `unlikely' flags.
This example describes a conditional branch delay slot which can
be nullified for forward branches that are taken (annul-true) or
for backward branches which are not taken (annul-false).
(define_delay (eq_attr "type" "cbranch")
[(eq_attr "in_branch_delay" "true")
(and (eq_attr "in_branch_delay" "true")
(attr_flag "forward"))
(and (eq_attr "in_branch_delay" "true")
(attr_flag "backward"))])
The `forward' and `backward' flags are false if the current `insn'
being scheduled is not a conditional branch.
The `very_likely' and `likely' flags are true if the `insn' being
scheduled is not a conditional branch. The The `very_unlikely'
and `unlikely' flags are false if the `insn' being scheduled is
not a conditional branch.
`attr_flag' is only used during delay slot scheduling and has no
meaning to other passes of the compiler.
File: gcc.info, Node: Tagging Insns, Next: Attr Example, Prev: Expressions, Up: Insn Attributes
Assigning Attribute Values to Insns
-----------------------------------
The value assigned to an attribute of an insn is primarily
determined by which pattern is matched by that insn (or which
`define_peephole' generated it). Every `define_insn' and
`define_peephole' can have an optional last argument to specify the
values of attributes for matching insns. The value of any attribute
not specified in a particular insn is set to the default value for that
attribute, as specified in its `define_attr'. Extensive use of default
values for attributes permits the specification of the values for only
one or two attributes in the definition of most insn patterns, as seen
in the example in the next section.
The optional last argument of `define_insn' and `define_peephole' is
a vector of expressions, each of which defines the value for a single
attribute. The most general way of assigning an attribute's value is
to use a `set' expression whose first operand is an `attr' expression
giving the name of the attribute being set. The second operand of the
`set' is an attribute expression (*note Expressions::.) giving the
value of the attribute.
When the attribute value depends on the `alternative' attribute
(i.e., which is the applicable alternative in the constraint of the
insn), the `set_attr_alternative' expression can be used. It allows
the specification of a vector of attribute expressions, one for each
alternative.
When the generality of arbitrary attribute expressions is not
required, the simpler `set_attr' expression can be used, which allows
specifying a string giving either a single attribute value or a list of
attribute values, one for each alternative.
The form of each of the above specifications is shown below. In
each case, NAME is a string specifying the attribute to be set.
`(set_attr NAME VALUE-STRING)'
VALUE-STRING is either a string giving the desired attribute value,
or a string containing a comma-separated list giving the values for
succeeding alternatives. The number of elements must match the
number of alternatives in the constraint of the insn pattern.
Note that it may be useful to specify `*' for some alternative, in
which case the attribute will assume its default value for insns
matching that alternative.
`(set_attr_alternative NAME [VALUE1 VALUE2 ...])'
Depending on the alternative of the insn, the value will be one of
the specified values. This is a shorthand for using a `cond' with
tests on the `alternative' attribute.
`(set (attr NAME) VALUE)'
The first operand of this `set' must be the special RTL expression
`attr', whose sole operand is a string giving the name of the
attribute being set. VALUE is the value of the attribute.
The following shows three different ways of representing the same
attribute value specification:
(set_attr "type" "load,store,arith")
(set_attr_alternative "type"
[(const_string "load") (const_string "store")
(const_string "arith")])
(set (attr "type")
(cond [(eq_attr "alternative" "1") (const_string "load")
(eq_attr "alternative" "2") (const_string "store")]
(const_string "arith")))
The `define_asm_attributes' expression provides a mechanism to
specify the attributes assigned to insns produced from an `asm'
statement. It has the form:
(define_asm_attributes [ATTR-SETS])
where ATTR-SETS is specified the same as for both the `define_insn' and
the `define_peephole' expressions.
These values will typically be the "worst case" attribute values.
For example, they might indicate that the condition code will be
clobbered.
A specification for a `length' attribute is handled specially. The
way to compute the length of an `asm' insn is to multiply the length
specified in the expression `define_asm_attributes' by the number of
machine instructions specified in the `asm' statement, determined by
counting the number of semicolons and newlines in the string.
Therefore, the value of the `length' attribute specified in a
`define_asm_attributes' should be the maximum possible length of a
single machine instruction.
File: gcc.info, Node: Attr Example, Next: Insn Lengths, Prev: Tagging Insns, Up: Insn Attributes
Example of Attribute Specifications
-----------------------------------
The judicious use of defaulting is important in the efficient use of
insn attributes. Typically, insns are divided into "types" and an
attribute, customarily called `type', is used to represent this value.
This attribute is normally used only to define the default value for
other attributes. An example will clarify this usage.
Assume we have a RISC machine with a condition code and in which only
full-word operations are performed in registers. Let us assume that we
can divide all insns into loads, stores, (integer) arithmetic
operations, floating point operations, and branches.
Here we will concern ourselves with determining the effect of an
insn on the condition code and will limit ourselves to the following
possible effects: The condition code can be set unpredictably
(clobbered), not be changed, be set to agree with the results of the
operation, or only changed if the item previously set into the
condition code has been modified.
Here is part of a sample `md' file for such a machine:
(define_attr "type" "load,store,arith,fp,branch" (const_string "arith"))
(define_attr "cc" "clobber,unchanged,set,change0"
(cond [(eq_attr "type" "load")
(const_string "change0")
(eq_attr "type" "store,branch")
(const_string "unchanged")
(eq_attr "type" "arith")
(if_then_else (match_operand:SI 0 "" "")
(const_string "set")
(const_string "clobber"))]
(const_string "clobber")))
(define_insn ""
[(set (match_operand:SI 0 "general_operand" "=r,r,m")
(match_operand:SI 1 "general_operand" "r,m,r"))]
""
"@
move %0,%1
load %0,%1
store %0,%1"
[(set_attr "type" "arith,load,store")])
Note that we assume in the above example that arithmetic operations
performed on quantities smaller than a machine word clobber the
condition code since they will set the condition code to a value
corresponding to the full-word result.
File: gcc.info, Node: Insn Lengths, Next: Constant Attributes, Prev: Attr Example, Up: Insn Attributes
Computing the Length of an Insn
-------------------------------
For many machines, multiple types of branch instructions are
provided, each for different length branch displacements. In most
cases, the assembler will choose the correct instruction to use.
However, when the assembler cannot do so, GCC can when a special
attribute, the `length' attribute, is defined. This attribute must be
defined to have numeric values by specifying a null string in its
`define_attr'.
In the case of the `length' attribute, two additional forms of
arithmetic terms are allowed in test expressions:
`(match_dup N)'
This refers to the address of operand N of the current insn, which
must be a `label_ref'.
`(pc)'
This refers to the address of the *current* insn. It might have
been more consistent with other usage to make this the address of
the *next* insn but this would be confusing because the length of
the current insn is to be computed.
For normal insns, the length will be determined by value of the
`length' attribute. In the case of `addr_vec' and `addr_diff_vec' insn
patterns, the length is computed as the number of vectors multiplied by
the size of each vector.
Lengths are measured in addressable storage units (bytes).
The following macros can be used to refine the length computation:
`FIRST_INSN_ADDRESS'
When the `length' insn attribute is used, this macro specifies the
value to be assigned to the address of the first insn in a
function. If not specified, 0 is used.
`ADJUST_INSN_LENGTH (INSN, LENGTH)'
If defined, modifies the length assigned to instruction INSN as a
function of the context in which it is used. LENGTH is an lvalue
that contains the initially computed length of the insn and should
be updated with the correct length of the insn. If updating is
required, INSN must not be a varying-length insn.
This macro will normally not be required. A case in which it is
required is the ROMP. On this machine, the size of an `addr_vec'
insn must be increased by two to compensate for the fact that
alignment may be required.
The routine that returns `get_attr_length' (the value of the
`length' attribute) can be used by the output routine to determine the
form of the branch instruction to be written, as the example below
illustrates.
As an example of the specification of variable-length branches,
consider the IBM 360. If we adopt the convention that a register will
be set to the starting address of a function, we can jump to labels
within 4k of the start using a four-byte instruction. Otherwise, we
need a six-byte sequence to load the address from memory and then
branch to it.
On such a machine, a pattern for a branch instruction might be
specified as follows:
(define_insn "jump"
[(set (pc)
(label_ref (match_operand 0 "" "")))]
""
"*
{
return (get_attr_length (insn) == 4
? \"b %l0\" : \"l r15,=a(%l0); br r15\");
}"
[(set (attr "length") (if_then_else (lt (match_dup 0) (const_int 4096))
(const_int 4)
(const_int 6)))])
File: gcc.info, Node: Constant Attributes, Next: Delay Slots, Prev: Insn Lengths, Up: Insn Attributes
Constant Attributes
-------------------
A special form of `define_attr', where the expression for the
default value is a `const' expression, indicates an attribute that is
constant for a given run of the compiler. Constant attributes may be
used to specify which variety of processor is used. For example,
(define_attr "cpu" "m88100,m88110,m88000"
(const
(cond [(symbol_ref "TARGET_88100") (const_string "m88100")
(symbol_ref "TARGET_88110") (const_string "m88110")]
(const_string "m88000"))))
(define_attr "memory" "fast,slow"
(const
(if_then_else (symbol_ref "TARGET_FAST_MEM")
(const_string "fast")
(const_string "slow"))))
The routine generated for constant attributes has no parameters as it
does not depend on any particular insn. RTL expressions used to define
the value of a constant attribute may use the `symbol_ref' form, but
may not use either the `match_operand' form or `eq_attr' forms
involving insn attributes.
File: gcc.info, Node: Delay Slots, Next: Function Units, Prev: Constant Attributes, Up: Insn Attributes
Delay Slot Scheduling
---------------------
The insn attribute mechanism can be used to specify the requirements
for delay slots, if any, on a target machine. An instruction is said to
require a "delay slot" if some instructions that are physically after
the instruction are executed as if they were located before it.
Classic examples are branch and call instructions, which often execute
the following instruction before the branch or call is performed.
On some machines, conditional branch instructions can optionally
"annul" instructions in the delay slot. This means that the
instruction will not be executed for certain branch outcomes. Both
instructions that annul if the branch is true and instructions that
annul if the branch is false are supported.
Delay slot scheduling differs from instruction scheduling in that
determining whether an instruction needs a delay slot is dependent only
on the type of instruction being generated, not on data flow between the
instructions. See the next section for a discussion of data-dependent
instruction scheduling.
The requirement of an insn needing one or more delay slots is
indicated via the `define_delay' expression. It has the following form:
(define_delay TEST
[DELAY-1 ANNUL-TRUE-1 ANNUL-FALSE-1
DELAY-2 ANNUL-TRUE-2 ANNUL-FALSE-2
...])
TEST is an attribute test that indicates whether this `define_delay'
applies to a particular insn. If so, the number of required delay
slots is determined by the length of the vector specified as the second
argument. An insn placed in delay slot N must satisfy attribute test
DELAY-N. ANNUL-TRUE-N is an attribute test that specifies which insns
may be annulled if the branch is true. Similarly, ANNUL-FALSE-N
specifies which insns in the delay slot may be annulled if the branch
is false. If annulling is not supported for that delay slot, `(nil)'
should be coded.
For example, in the common case where branch and call insns require
a single delay slot, which may contain any insn other than a branch or
call, the following would be placed in the `md' file:
(define_delay (eq_attr "type" "branch,call")
[(eq_attr "type" "!branch,call") (nil) (nil)])
Multiple `define_delay' expressions may be specified. In this case,
each such expression specifies different delay slot requirements and
there must be no insn for which tests in two `define_delay' expressions
are both true.
For example, if we have a machine that requires one delay slot for
branches but two for calls, no delay slot can contain a branch or call
insn, and any valid insn in the delay slot for the branch can be
annulled if the branch is true, we might represent this as follows:
(define_delay (eq_attr "type" "branch")
[(eq_attr "type" "!branch,call")
(eq_attr "type" "!branch,call")
(nil)])
(define_delay (eq_attr "type" "call")
[(eq_attr "type" "!branch,call") (nil) (nil)
(eq_attr "type" "!branch,call") (nil) (nil)])
File: gcc.info, Node: Function Units, Prev: Delay Slots, Up: Insn Attributes
Specifying Function Units
-------------------------
On most RISC machines, there are instructions whose results are not
available for a specific number of cycles. Common cases are
instructions that load data from memory. On many machines, a pipeline
stall will result if the data is referenced too soon after the load
instruction.
In addition, many newer microprocessors have multiple function
units, usually one for integer and one for floating point, and often
will incur pipeline stalls when a result that is needed is not yet
ready.
The descriptions in this section allow the specification of how much
time must elapse between the execution of an instruction and the time
when its result is used. It also allows specification of when the
execution of an instruction will delay execution of similar instructions
due to function unit conflicts.
For the purposes of the specifications in this section, a machine is
divided into "function units", each of which execute a specific class
of instructions in first-in-first-out order. Function units that
accept one instruction each cycle and allow a result to be used in the
succeeding instruction (usually via forwarding) need not be specified.
Classic RISC microprocessors will normally have a single function unit,
which we can call `memory'. The newer "superscalar" processors will
often have function units for floating point operations, usually at
least a floating point adder and multiplier.
Each usage of a function units by a class of insns is specified with
a `define_function_unit' expression, which looks like this:
(define_function_unit NAME MULTIPLICITY SIMULTANEITY
TEST READY-DELAY ISSUE-DELAY
[CONFLICT-LIST])
NAME is a string giving the name of the function unit.
MULTIPLICITY is an integer specifying the number of identical units
in the processor. If more than one unit is specified, they will be
scheduled independently. Only truly independent units should be
counted; a pipelined unit should be specified as a single unit. (The
only common example of a machine that has multiple function units for a
single instruction class that are truly independent and not pipelined
are the two multiply and two increment units of the CDC 6600.)
SIMULTANEITY specifies the maximum number of insns that can be
executing in each instance of the function unit simultaneously or zero
if the unit is pipelined and has no limit.
All `define_function_unit' definitions referring to function unit
NAME must have the same name and values for MULTIPLICITY and
SIMULTANEITY.
TEST is an attribute test that selects the insns we are describing
in this definition. Note that an insn may use more than one function
unit and a function unit may be specified in more than one
`define_function_unit'.
READY-DELAY is an integer that specifies the number of cycles after
which the result of the instruction can be used without introducing any
stalls.
ISSUE-DELAY is an integer that specifies the number of cycles after
the instruction matching the TEST expression begins using this unit
until a subsequent instruction can begin. A cost of N indicates an N-1
cycle delay. A subsequent instruction may also be delayed if an
earlier instruction has a longer READY-DELAY value. This blocking
effect is computed using the SIMULTANEITY, READY-DELAY, ISSUE-DELAY,
and CONFLICT-LIST terms. For a normal non-pipelined function unit,
SIMULTANEITY is one, the unit is taken to block for the READY-DELAY
cycles of the executing insn, and smaller values of ISSUE-DELAY are
ignored.
CONFLICT-LIST is an optional list giving detailed conflict costs for
this unit. If specified, it is a list of condition test expressions to
be applied to insns chosen to execute in NAME following the particular
insn matching TEST that is already executing in NAME. For each insn in
the list, ISSUE-DELAY specifies the conflict cost; for insns not in the
list, the cost is zero. If not specified, CONFLICT-LIST defaults to
all instructions that use the function unit.
Typical uses of this vector are where a floating point function unit
can pipeline either single- or double-precision operations, but not
both, or where a memory unit can pipeline loads, but not stores, etc.
As an example, consider a classic RISC machine where the result of a
load instruction is not available for two cycles (a single "delay"
instruction is required) and where only one load instruction can be
executed simultaneously. This would be specified as:
(define_function_unit "memory" 1 1 (eq_attr "type" "load") 2 0)
For the case of a floating point function unit that can pipeline
either single or double precision, but not both, the following could be
specified:
(define_function_unit
"fp" 1 0 (eq_attr "type" "sp_fp") 4 4 [(eq_attr "type" "dp_fp")])
(define_function_unit
"fp" 1 0 (eq_attr "type" "dp_fp") 4 4 [(eq_attr "type" "sp_fp")])
*Note:* The scheduler attempts to avoid function unit conflicts and
uses all the specifications in the `define_function_unit' expression.
It has recently come to our attention that these specifications may not
allow modeling of some of the newer "superscalar" processors that have
insns using multiple pipelined units. These insns will cause a
potential conflict for the second unit used during their execution and
there is no way of representing that conflict. We welcome any examples
of how function unit conflicts work in such processors and suggestions
for their representation.
File: gcc.info, Node: Target Macros, Next: Config, Prev: Machine Desc, Up: Top
Target Description Macros
*************************
In addition to the file `MACHINE.md', a machine description includes
a C header file conventionally given the name `MACHINE.h'. This header
file defines numerous macros that convey the information about the
target machine that does not fit into the scheme of the `.md' file.
The file `tm.h' should be a link to `MACHINE.h'. The header file
`config.h' includes `tm.h' and most compiler source files include
`config.h'.
* Menu:
* Driver:: Controlling how the driver runs the compilation passes.
* Run-time Target:: Defining `-m' options like `-m68000' and `-m68020'.
* Storage Layout:: Defining sizes and alignments of data.
* Type Layout:: Defining sizes and properties of basic user data types.
* Registers:: Naming and describing the hardware registers.
* Register Classes:: Defining the classes of hardware registers.
* Stack and Calling:: Defining which way the stack grows and by how much.
* Varargs:: Defining the varargs macros.
* Trampolines:: Code set up at run time to enter a nested function.
* Library Calls:: Controlling how library routines are implicitly called.
* Addressing Modes:: Defining addressing modes valid for memory operands.
* Condition Code:: Defining how insns update the condition code.
* Costs:: Defining relative costs of different operations.
* Sections:: Dividing storage into text, data, and other sections.
* PIC:: Macros for position independent code.
* Assembler Format:: Defining how to write insns and pseudo-ops to output.
* Debugging Info:: Defining the format of debugging output.
* Cross-compilation:: Handling floating point for cross-compilers.
* Misc:: Everything else.